TUD210數字超聲探傷儀

TUD210 數字超聲探傷儀簡介:

·EL高亮度圖形點陣顯示,可以滿足強日光下、涵洞內使用的要求;·DAC曲線偏置可調,滿足了任何標準的要求;·超高采樣率;·整機全部軟件可以通過通訊口在線升級;·超薄超輕(厚度53mm 含電池重1.2kg)。

TUD210 數字超聲探傷儀主要特點:

技術指標: 1.測量范圍(mm):2.5~5000(鋼縱波)2.工作頻率(MHz):0.2~103.增益調節:0~110dB; 4.垂直線性誤差:≤3%5.動態范圍:≥32dB6.水平線性誤差:≤0.2%7.波形顯示: 正半波、負半波、全波和射頻8.探傷靈敏度余量:≥50dB9.脈沖移位:-20~+3400 us10.探頭延時:0us~99.99us,分辨率0.0111.掃描分辨率:0.1mm (2.5~100mm);       1mm(100~1000mm);       10mm(1000~5000mm)12.聲速:1000m/s~9999m/s13.外形尺寸(mm):230×184×5314.重量(含電池):1.2KgTUD210 數字超聲探傷儀功能特點:·超高采樣速率,射頻波形細節盡現,最小顯示范圍2.5mm!ね瑫r具備USB和RS232串行通訊口。·整機全部軟件可以通過通訊口在線升級。用戶可以在時代網站下載本機嵌入式軟件,自行升級,方便快捷!碛须娮訒r鐘日歷!ご笕萘看鎯ζ骺纱鎯Ω哌_(dá)400幅A掃圖形及參數和40000個厚度值!400個獨立探傷通道!な褂么笕萘夸囯x子電池,無記憶性,連續工作時間約6小時!ぞ哂腥龡l可調偏置的DAC曲線,可以適應不同行業中DAC曲線的繪制標準! EL高亮度圖形點陣顯示屏,無視角限制、不受溫度、陽光影響。·具有雙閘門設置和報警功能。能夠在屏幕上任意設置閘門的位置和寬度,有進波、 失波和自動三種報警方式。·可以在單探頭和雙探頭兩種探傷工作方式之間任意切換!ぬ筋^阻尼通過菜單選擇在50、150、400之間切換。·可以利用標準試塊自動生成DAC曲線!ぞ哂芯性抑制功能,屏高的0~80%,步距:1%!ぞ哂写蛴」δ埽ㄟ^串行打印機打印厚度報告與波幅曲線!た梢赃M(jìn)行屏幕硬拷貝,將當前屏幕上的圖形和菜單拷貝并打印!つ軌蚋鶳C機通訊,擁有功能強大的windows數據處理軟件。標準配置:1.主機 1個2.直探頭  F20  2.5MHz (1支)3.斜探頭 8×9K2  5MHz (1支)4.LEMO探頭連電纜 2根選配件:1.行式熱敏打印機(TPUP-NH)2.串行通訊電纜3.PC通訊軟件4.筆記本電腦

Phasor系列Phasor系列超聲波探傷儀-美國GE

我公司為GE檢測科技華南授權經銷商,歡迎來電咨詢!公司網址:www.sztmp.com 

Phasor系列超聲波探傷儀提供4款不同型號,具有可升級的特點和優勢。Phasor CV是編碼兼容的傳統超聲波探傷儀,可升級為Phasor 16/16 Weld或16/64 Phasor XS。可通過快速簡便的軟件升級至相控陣Phasor 16/16 Weld或相控陣Phasor XS.無需更換主基板硬件,利用相同的簡單菜單驅動的界面作為Phasor CV模型,不需要培訓。與相控陣傳感器相結合,兩個平臺都可以在更短的時間內,以合理的價格解決您最苛刻的檢測應用要求。

Phasor 16/16 Weld和Phasor XS可以迅速切換到常規UT,這樣檢測員可以使用任何標準的傳感器,評估檢測到的缺陷(定位和尺寸)是否符合指定標準或測試規范的要求。

Phasor CV/DM集相控陣成像設備和傳統的探傷儀于一體,具有相控陣探頭,可以顯著提高腐蝕檢測數據的性。

特色:

 

改進的檢測生產率

下載

 

 
接受軟件條款 close
 
NOTICE – READ THIS  CAREFULLY: THIS IS A LEGAL AND BINDING  AGREEMENT BETWEEN YOU AND LICENSOR. BY INSTALLING THE SOFTWARE, YOU AGREE TO  ALL THE TERMS AND CONDITIONS OF THIS SOFTWARE LICENSE (“LICENSE”). IF YOU DO  NOT AGREE TO THESE TERMS, DO NOT DOWNLOAD OR INSTALL THE SOFTWARE. 1. Definitions Unless otherwise agreed to by Licensor, the following terms shall mean: “Documentation” means all material, including all printed material and on-line or electronic documentation (excluding training materials), referencing the Software and Third-Party Software provided hereunder. “Software” means Licensor’s proprietary computer software and software security devices provided by Licensor under this License. “Third-Party Software” means any proprietary computer software owned by a third party that Licensor may provide to you hereunder. 2. License Grant 2.1 Subject to the terms of this License, Licensor hereby grants to you a non-transferrable and nonexclusive license to use the Software and Documentation, including upgraded, modified or enhanced versions provided by Licensor and to use the Third-Party Software, all for your internal business purposes only 2.2 You have no right to (i) lease, rent, transfer, distribute, sublicense, timeshare or allow third parties to access the Software, Documentation or Third-Party Software, nor assign any rights hereunder to a third party without Licensor’s prior, written agreement; (ii) disassemble, decompile, reverse engineer or otherwise attempt to reconstruct or discover the source code of the Software or Third-Party Software; (iii) pledge the Software or Third-Party Software as collateral or otherwise or encumber such Software or Third-Party Software with any lien or security interest; or (iv) remove any product identification, copyright, trademark or other notice from the Software, Documentation or Third-Party Software. If you  believe that you are entitled to reverse engineer the Software as a matter of local law (e.g., the Council Directive of May 14, 1991, of the Council of the European Communities, as amended), you agree that you shall first request technical information from Licensor. You shall use any technical information delivered by Licensor only for purposes of ensuring “interoperability” and compatibility and shall treat such technical information as Proprietary Information (defined below). Any reverse engineering of the Software shall void any warranties or indemnification obligations of Licensor and shall automatically release Licensor from any obligation to provide support services under this or any separate agreement. 2.3  Certain software Licensor provides to you may contain Third-Party Software, including but not limited to “open source” software. Use of the Third-Party Software and its source code may be governed by separate copyright notices and license provisions, which may be found or identified in the Documentation or on the media delivered with the Software and which are incorporated by reference into this License. You shall not modify or combine the Software and/or any Third-Party Software in any manner that could cause, or could be interpreted or asserted to cause, the Software or any modifications thereto to become subject to the terms of any license applicable to Third Party Software. 2.4  Unless otherwise agreed to by Licensor or specified on your accepted Purchase Order, you shall only have the right to install and use a single copy of the Software and Third-Party Software on a single computer workstation for use by a single user, which may be referred to as a “CPU License.” If “Local Area Network License” rights were purchased, you are authorized to install and use by the designated maximum number of concurrent users on any number of I/O access stations for a designated Local Area Network (LAN). LAN is defined as a hard-wired computer network system which inter-connects computers within a building, facility or site. A facility or site is defined as a production factory or plant producing a product or multiple products at a single location. Concurrent users are defined as your employees logged onto the software application at the same time regardless of activity. Use over a Wide Area Network (WAN) is strictly prohibited, except as may be provided by separate agreement resulting from special license negotiations. WAN is defined as any computer network system that inter-connects one or more computers within a building, facility or site to one or more computers residing outside the same building, facility or site. 2.5 You may make one (1) copy of the Software, Documentation and Third-Party Software for backup purposes only. You must reproduce and include all proprietary rights and copyright notices on any backup copies. Except as authorized under this License, no copies of the Software, Documentation or Third-Party Software may be made by you or any third party; provided, however, you may print online Software documentation for its own internal use, provided the maximum number of copies may not exceed the number of users  licensed hereunder. 3. Support Services; Upgrades This License does not obligate Licensor to provide maintenance and support on any  Software or Third-Party Software licensed hereunder. Support services are available under separate agreement. If the Software is an upgrade of a previous version (provided such upgrade was obtained under a separate support services agreement with Licensor or a Licensor authorized distributor), you may use the upgraded Software only in accordance with this License. Licensor will use commercially reasonable attempts to answer your technical support requests concerning the Software during Licensor’s normal business hours; however, this service is offered as a convenience to you, and Licensor may not be able to resolve every support request. For technical support requests, you may contact Licensor, as indicated in the Documentation or Help section of the Software. Licensor reserves the right to charge for customer support services, provided you receives advance notice of all applicable charges. IN NO EVENT WILL GE OR ITS SUPPLIERS BE LIABLE FOR INDIRECT, SPECIAL, INCIDENTAL, CONTINGENT, CONSEQUENTIAL, PUNITIVE OR SIMILAR DAMAGES OF ANY KIND RESULTING FROM THE DELIVERY OR NON-DELIVERY OF TECHNICAL SUPPORT SERVICES OF ANY  KIND. THIS INCLUDES, BUT IS NOT LIMITED TO, PERSONAL INJURY, PROPERTY DAMAGE, DAMAGE TO ANY PARTY\\\\\\\\'S COMPUTER OR OTHER EQUIPMENT AND THE LOSS OF ANY DATA. 4. Verification During the term of this License and for 3 years thereafter, Licensor may upon reasonable notice require that an independent audit of the use of the Software and Third-Party Software be conducted during your normal business hours. Upon such notice, you shall provide Licensor’s independent auditor site access and  the right to inspect relevant portions of your computer system on which the Software and Third-Party Software resides. 5. Term and Termination 5.1 The Software, Documentation and Third-Party Software shall be considered accepted by you upon receipt. 5.2 This License is effective until terminated. Licensor may terminate this License immediately if you fail to comply with any of the terms and conditions herein. Upon termination, you shall (a) cease using the Software, Documentation and Third-Party Software and (b) certify to Licensor within one (1) month of termination that you have destroyed or returned to Licensor the Software, Documentation and Third-Party Software, and all copies thereof. 6. Ownership 6.1 All Software, Documentation and Third-Party Software are licensed and not sold. You agree that Licensor and its suppliers own all proprietary rights, including, but not limited to any patent, copyright, trade secret, trademark and other proprietary rights in and to the Software, Documentation and Third-Party Software, including any Derivative  Works thereof, and any corrections, bug fixes and updates to such Software, Documentation, Third-Party Software or Derivative Works. For purposes hereof, “Derivative Works” shall mean (i) any work that is based upon one or more pre-existing works, such as a revision, enhancement, modification, translation, abridgement, condensation, expansion, extension or any other form in which such pre-existing works may be recast, transformed or adapted, and that, if prepared without the authorization of the owner of the copyright to such pre-existing works would constitute a copyright infringement and (ii) any compilation that incorporates such a pre-existing work. You shall have only a “right to use” license to any Derivative Works in accordance with the terms of this License. 6.2 For the purposes of this Article, the term “Licensor” shall mean Licensor, its  affiliates and their successors or assigns. 7. Limited Warranties 7.1 Licensor warrants, for your benefit alone, that under normal use the media in which the Software is embedded shall be free from defects in material and  workmanship, for a period of one (1) year from the date of delivery of the initial Software (“Warranty Period”). 7.2 Licensor warrants, for your benefit alone, that during the Warranty Period, the  Software will perform substantially in accordance with its Documentation. If, during the Warranty Period, an Error occurs (where “Error” is defined as a problem caused by an incorrect operation of the unmodified computer code in the Software or an incorrect statement or diagram in the Documentation that produces incorrect results), Licensor will use commercially reasonable efforts to correct such Error, provided you furnish Licensor with the following: (a) written notice of the warranty claim,  including a description of the failure to perform in accordance with the Documentation and a specific description of the operating conditions (including the specific software/hardware configuration) under which the failure occurred and (b) to the extent feasible, a representative sample of inputs for repeating and analysing the failure. If Licensor is unable, after commercially reasonable efforts, to correct the Error, your sole remedy shall be termination of this License and a refund of the license fees allocable to the specific nonconforming Software that have been paid by you to Licensor hereunder. 7.3 This Article sets forth the exclusive remedies for all claims based on failure of or defect in the Software and Documentation, whether the failure or defect arises before or during the Warranty Period and whether a claim, however instituted, is based on contract, indemnity, warranty, tort (including negligence) or civil liability, strict liability or otherwise. The warranties provided herein are  exclusive and are in lieu of all other warranties and guarantees whether written, oral, implied or statutory. NO IMPLIED STATUTORY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL APPLY. Without limiting the foregoing, Licensor does not warrant that the Software or Documentation (or YOUR use thereof) will be free from all errors or its use will be uninterrupted. 7.4 Any remedial steps taken by Licensor hereunder shall not extend the applicable Warranty Period. 7.5 Except as expressly authorized by Licensor in writing, all Third-Party Software shall carry only the warranties provided by the owners thereof and Licensor gives no warranties for such Third-Party Software. 8. Proprietary Information; Equitable Relief 8.1 All information concerning or embedded in the Software (including but not limited to source code and training materials), Documentation and Third-Party Software is confidential and shall be considered Licensor’s (or its suppliers’) proprietary information (“Proprietary Information”) whether or not the information is marked as Proprietary Information. The Proprietary Information includes commercially valuable, substantial trade secrets, the design and development of which reflect the effort of skilled development experts and investment of considerable amounts of time and money. 8.2 You acknowledge: (a) any use of the Software, Documentation or Third-Party Software in a manner inconsistent with this License or (b) any other misuse of the Proprietary Information of Licensor (or its suppliers), will cause immediate irreparable harm to Licensor (or its suppliers) for which there is no adequate remedy at law. You agree that Licensor (or its suppliers) shall be entitled to immediate and permanent injunctive relief from a court of competent jurisdiction in the event of any such misuse or threatened misuse by you. The parties agree and stipulate that Licensor shall be entitled to such injunctive relief without posting of a bond or other security; provided, however, that if the posting of a bond is a prerequisite to obtaining injunctive relief, then a bond in an amount equivalent to U.S. $1,000 shall be sufficient. Nothing contained herein shall limit Licensor’s right to any remedies at law, including the recovery of damages from you for breach of this License. 9. Compliance With Laws You understand and recognize that the Software, Documentation and Third-Party Software made available to you hereunder are subject to all applicable trade control laws and regulations. You hereby agree that you will not tranship, re-export, divert or direct the Software, Documentation or Third-Party Software, other than in and to the ultimate country of destination specified on your order or declared as the country of ultimate destination on Licensor’s invoice, except as permitted by applicable laws and regulations. 10. Limitation  of Liability 10.1 The total liability of Licensor, on all claims of any kind (excluding claims for death or bodily injury), whether in contract, warranty, indemnity, tort/extracontractual liability (including negligence), strict liability or otherwise, arising out of the performance or breach of this License or use of any Software, Documentation and Third-Party Software, shall not exceed the price of the specific Software, Documentation or Third-Party Software giving rise to the claim. All Licensor’s liability under this License shall terminate upon the expiration of the Warranty Period, provided that you may enforce a claim of such liability accruing during the Warranty Period by an action timely commenced in accordance with the applicable statute of limitations or statute of repose, but in no event greater than one (1) year after the expiration of such Warranty Period. 10.2 In no event, whether as a result of breach of contract, warranty,  tort/extracontractual liability (including negligence), strict liability, indemnity or otherwise, shall Licensor be liable for loss of profits or revenues, loss of use of the Software, Documentation or Third-Party Software or any associated equipment, interruption of business, cost of capital, cost of cover, downtime costs, claims of your customers for such damages or for any special, consequential, incidental, indirect, punitive or exemplary damages. 10.3 If Licensor furnishes you with advice or assistance that is not required under this License, the furnishing of such advice or assistance will not subject Licensor to any liability, whether in contract, indemnity, warranty, tort (including negligence), strict liability or otherwise. 10.4 For the purposes of this Section 10, the term “Licensor” shall mean Licensor, its affiliates, subcontractors and suppliers of any tier and their respective agents and employees, whether individually or collectively. 11. Dispute Resolution, Governing Law 11.1 If you have your pertinent place of business in a country other than the U.S.,  Korea, Taiwan, Japan, Thailand, Vietnam, Indonesia or the Philippines, any dispute arising out of or in connection with this License, including any question regarding its existence, validity or termination, shall be referred to and finally resolved by arbitration under the London Court of International Arbitration (“LCIA”) Rules, which Rules are deemed to be incorporated by reference into this clause. The number of arbitrators shall be one unless the amount in dispute exceeds the equivalent of $1,000,000, in which event it shall be three. When three arbitrators are involved, each party shall appoint one arbitrator, and those two shall appoint the third, who shall be the Chairma. None of the arbitrators may be a national or resident of the countries in which either party is organized or has its principal place of business. The seat, or legal place, of arbitration shall be London, England. The arbitration shall be conducted in the English language. In reaching their decision, the arbitrators shall give full force and effect to the intent of the parties as expressed in this License, and if a solution is not found herein, shall apply the governing law of this License. The decision of the arbitrator shall be final and binding upon both parties, and neither party shall seek recourse to a law court or other authority to appeal for revisions of such decision. 11.2 If you have your pertinent place of business in the U.S., Korea, Taiwan, Japan, Thailand, Vietnam, Indonesia or the  Philippines, any dispute arising out of or in connection with this License, shall be brought in the U.S. District Court for the Northern District of New York, or in the event that court lacks jurisdiction to hear the claim, in the appropriate state courts of Onondaga County, New York, and the parties irrevocably consent to the exclusive jurisdiction of such courts in respect of all such claims. Each party hereby submits to and accepts generally and unconditionally the jurisdiction of those courts with respect to its respective person and property, and irrevocably consents to the service of process in connection with any such action or proceeding by personal delivery to the party or by the mailing thereof by registered or certified mail, postage prepaid to the other party at the address for the party. 11.3 The validity, performance and all matters relating to the interpretation and effect of this License and all further documents executed pursuant to it shall be construed and interpreted in accordance with the laws of (i) the State of  New York, U.S., if you have your pertinent place of business in the U.S. or (ii) England and Wales if you have your pertinent place of business outside of the U.S., excluding its rules on the conflict or choice of laws. If you have your pertinent place of business outside of the U.S., the United Nations Convention on Contracts for the International Sale of Goods shall not apply. 12. Patent Indemnification 12.1 Subject to the terms of this License, Licensor shall indemnify you against any damages, costs and expenses arising out of any suit, claim or proceeding (a “Claim”) alleging that the Software or Documentation infringes a patent in effect in the U.S., an EU member state or country of delivery (provided there is a corresponding patent issued by the U.S. or an EU member state) or U.S. copyright or copyright registered in the country of delivery; provided that: (a) you promptly notify Licensor in writing of any such Claim; (b) you make no admission of liability and gives Licensor sole authority, at Licensor’s expense, to direct and control all defense, settlement and compromise negotiations; and (c) you provide Licensor with full disclosure and assistance that may be reasonably required to defend any such Claim. 12.2 Licensor shall  have no obligation or liability with respect to any Claim based upon: (a) any Software or Documentation that has been altered, modified or revised; (b) the combination, operation or use of any Software or Documentation with other products when such combination is part of any allegedly infringing process; (c) failure of you to implement any update provided by Licensor that would have prevented the Claim; or (d) unauthorized use of Software or Documentation, including, without limitation, a breach of the provisions of this License. 12.3 Should any Software or Documentation or any portion thereof, become the subject of a Claim, Licensor may at its option (a) procure for you the right to continue using the Software or Documentation or portion thereof, (b) modify or replace it in whole or in part to make it non-infringing or (c) failing (a) or (b), take back the Software or Documentation and refund any fees received by Licensor attributable to the infringing Software or Documentation. 12.4 This states Licensor’s entire liability for indemnification for patent, trademark, copyright and trade secret infringement for the Software or Documentation. 12.5 Notwithstanding the foregoing, with respect to any Third-Party Software or portions thereof, only the indemnity of the manufacturer/developer, if any, shall apply. 13. General Clauses 13.1 Software and Third-Party Software licensed hereunder are not intended for use in connection with any nuclear facility or activity without the written consent of Licensor. You warrant that you shall not use or permit others to use Software or Third-Party Software for such purposes, unless Licensor agrees to such use in writing. If, in breach of the foregoing, any such use occurs, Licensor disclaims all liability for any nuclear or other damages, injury or ontamination and in addition to any other legal or equitable rights of Licensor, you shall indemnify and hold Licensor harmless against any such liability. If Licensor agrees in writing to any such nuclear use, Licensor’s special terms and conditions for nuclear applications and protections against nuclear liability shall be attached and incorporated fully herein by reference. 13.2 Licensor may assign or novate its rights and obligations under this License, in part or in whole, to any entity directly or indirectly controlling, controlled by or under common control with Licensor without your consent. You agree to execute such documents as may be necessary to effect the assignment or novation. The delegation or assignment by you of any or all of your duties or rights under this License without Licensor’s prior written consent shall be void. 13.3 If any provision of this License is found to be void or unenforceable the remainder of this License shall not be affected and the parties hereby agree that they will replace any such void or unenforceable provision with a new provision that achieves substantially the same practical or economic effect and which is valid and enforceable. 13.4 This License represents the entire agreement between the parties, and no  modification, amendment or waiver shall be binding on either party unless agreed in writing by the parties’ authorized representatives. 13.5 For direct and indirect U.S. government contracts only, all Software,  Documentation and Third-Party Software provided hereunder shall be considered “commercial items” as defined in FAR Part 2, 2.101 and in accordance with FAR 52.244-6. If the reasonableness of the price cannot be established, if cost or pricing data is required for any other reason, or if the Software,  Documentation or Third-Party Software cannot be considered “commercial items,” Licensor may withdraw the proposal or cancel this License without penalty or other liability. 13.6 Upon request you agree to provide Licensor with a signed copy of this License.
 
page-loader
  close
 
 
 
 
說明 中文 English Français Deutsch 日本語 Português RU Español
Corrosion Erosion Brochure   acrobat-reader         acrobat-reader  
Inspection Technologies Brochure   acrobat-reader   acrobat-reader     acrobat-reader acrobat-reader
Phasor CV Brochure   acrobat-reader acrobat-reader acrobat-reader   acrobat-reader   acrobat-reader
Phasor CV/DM Brochure   acrobat-reader         acrobat-reader  
Phasor PDI Kit Brochure   acrobat-reader            
Phasor Series   acrobat-reader acrobat-reader acrobat-reader       acrobat-reader
Phasor Series Brochure             acrobat-reader  
Phasor Series Operating Manual   acrobat-reader acrobat-reader acrobat-reader       acrobat-reader
Phasor Series Overview Flyer   acrobat-reader         acrobat-reader  
Phasor Series Quick Start acrobat-reader acrobat-reader acrobat-reader acrobat-reader        
Phasor XS Data Sheet acrobat-reader acrobat-reader acrobat-reader acrobat-reader acrobat-reader     acrobat-reader
按此下載 Phasor XS Ultrasonic Portable Flaw Detector Software Update

美國GE/德國KK超聲波探傷儀

特級代理:美國GE/德國KK 超聲波探傷儀 歡迎訂購!
1.         Phasor XS便攜式相控陣超聲波探傷儀
2.         USM Vision超聲焊縫檢測探傷儀
3.         USM35X 支柱瓷絕緣子及瓷套專用超聲波探傷儀
4.         USM35XS 超聲波探傷儀
5.         USM GO Advanced型超聲波探傷儀
6.         USM GO DAC超聲波探傷儀
7.         USM GO AWS超聲波探傷儀
8.         USM GO Basic超聲波探傷
9.         USM35XDAC 超聲波探傷儀
10.     USN58L/R 超聲波探傷儀
11.     USN60 超聲波探傷儀

檢測范圍 聲速范圍 顯示延遲 探頭延遲 阻尼 測試模式 脈沖發生器 脈沖電壓(方波脈沖模式) 脈沖寬度(方波脈沖模式) 脈沖能量(方波脈沖模式) 脈沖重復頻率 增益 頻率范圍 閘門監視器 聲程測量 整流 抑制 單位 輸出 顯示屏 A掃描尺寸 A掃描刷新頻率 數據存儲 厚度值存儲 語言 探頭連接 鍵盤 電源 工作溫度 存儲溫度 尺寸和重量

1~27940mm(鐵)連續可調或在預置范圍內可調 250~16000m/s,連續可調,1m/s步進,65種材料聲速可選 -20~3498us 0~999.9us 50、75、150、1000Ω 脈沖回波法,雙晶法和穿透法 方波脈沖 50~450v,步進為10v 50~1000ns,步進為10ns 低、高 15~6000Hz,自動低、自動高和手動調節 110dB,以0.1/0.5/1/2/6dB為單位分級調節;用戶可自己定義,可鎖定 0.25~25MHz,有10種設置可供選擇 兩個獨立的閘門 始波至回波,可選擇前沿或峰值多回波 RF/全波/正/負半波整流 0~80%,線性 公英制可選 TTL報警信號/模擬輸出/RS232輸出 98x113mm,640x480象素VGA,4種顏色可選,8種A掃描顏色可選,帶背光,可調節明暗度 標準440x401象素,或440x201象素 60Hz 最少200組數據,包括儀器的操作參數和A掃描,可保存2年 最多99999個厚度值 德語、英語、法語、意大利語、葡萄牙語、西班牙語、丹麥語、瑞典語、挪威語、芬蘭語、荷蘭語、羅馬尼亞、捷克、斯洛文尼亞 Lemo或BNC接口 國際標準鍵盤 6個NiMH(9Ah)電池,可工作6小時 0~55℃ -25~70℃(不帶電池) 282x150x159mm,3kg
 
該公司產品分類: 轉速表 測振儀

CYE-3z長期供應便攜電磁軛探傷儀

特點及用途:。CYE-3Z型除有CYE-3A的一切功能外,根據用戶需求隨機配置磁鉗形探頭,環形探頭,達到一機多用目的。主要技術指標:1.提升力:交流磁軛98N(10Kg);帶活動關節時69N(7 Kg);旋轉磁場98N(10 Kg)(被探工件表面與探頭端面氣隙1.5mm。2.探頭極距:交流磁軛探頭,固定式為155mm,帶活關節時為50-200mm;旋轉磁場兩相鄰探頭鐵芯中心距為125mm;。探頭工作電壓36V。3.靈敏度:磁軛,旋轉磁場探傷時均可清晰顯示30/100A型標準試片上的人工刻槽。4.電源電壓:交流220V、50Hz。5.重量:電磁軛探頭2 Kg,旋轉磁場探頭4 Kg。6.探頭配置A/D,  D/E,  A/O,A/E. 

該公司產品分類: 手持式激光元素分析儀 手持式合金分析儀 便攜式直讀光譜儀 靜電阻測試儀 埋地管道探測檢漏儀 埋地管道防腐綜合參數測量儀TD-AY506B 埋地管道防腐層絕緣電阻測量儀 紅外熱像儀 安全閥在線檢測儀 殘余應力儀 表面燒傷檢測儀 手持式土壤重金屬分析儀 鋼絲繩探傷儀 測溫儀 測振儀 硬度計 測厚儀 移動式直讀光譜儀 全譜直讀光譜儀 火花直讀光譜儀

XY—209供應丹東祥業電氣-無損檢測超聲波探傷儀

 

 

 

 

關鍵詞:超聲波  探傷儀  超聲波探傷儀
一、產品介紹:
    
采用信噪比很高的信號放大電路,以及100MHz帶寬的信號采集電路以提高探傷靈敏度余量;采用高亮的TFT彩色液晶屏,可以根據探傷環境自由設置界面色彩;操作非常簡單,入門快,具有萬能旋鈕功能;高速響應,高智能化,操作簡單的操作平臺可大大提高操作人員的工作效率。
二、產品特點:
□ 5.7寸高亮真彩TFT液晶屏幕□ 儀器校驗自動化,可自動測試材料聲速,零偏,和K值□ 10個獨立探傷通道,可以自由設置各行業探傷工藝標準,現場探傷無需攜帶試塊! 高靈敏度,增益達110dB,共分0.1dB, 2dB, 6dB, 自動4檔微調,其中自動檔可按預設的回波高度自動調節,回波抑制任意可調,不影響儀器增益和線性! 重復頻率在50Hz—1000Hz范圍內可調! DAC,AVG曲線自動生成并能分段制作,取樣點不受限制,并可進行補償與修正。可實現指定回波的距離波幅補償。□ 缺陷回波參數(距離、水平、垂直、波幅、dB當量、孔徑)實時顯示! 具有動態焊縫剖口示意圖,形象直觀,可有效的幫助探傷人員對焊縫缺陷進行分析! 具有峰值記憶、回波包絡、波形凍結等強大功能。 具有萬能旋鈕,且具有鎖止功能,防止意外修改數據! 進波和失波報警,門位、門寬、門高連續可調! 800組探傷工藝和數據存貯,文件自動編號,高可靠數據保護確保存儲數據不丟失! 智能化識別USB盤,方便導出數據! 數據處理能力強,自動記錄探傷參數,可與計算機實現數據通訊和數據管理。□ 結構設計人性化,電池方便拆卸,體積小巧,重量輕,攜帶使用輕松自如 。
 
三、產品參數

增益范圍
0.0-110.0dB
靈敏度余量
≥62dB
探測范圍
0.0-10000.0mm
數字抑制
(0-90)%
頻帶寬度
(0.5-15)MHz
電噪電平
≤5%
阻抗匹配
51,150,200,400Ω
工作時間
≥8小時
聲速范圍
(0-9999)m/s
環境溫度
(-25-50)℃
動態范圍
     ≥32dB
電源
直流交流12V 220V
垂直線性誤差
     ≤3%
外形尺寸
250x165x43mm
水平線性誤差
     ≤0.1%
重量
整機1.2kg
分辨力
 ≥36dB(5P14)
 
 

 
我們的聯系電話:0415——6273355 2662286傳真:0415——6273355
地址:遼寧省丹東市儀器儀表園中央大道31-71-7
該公司產品分類: 工業CT掃描 國外代理產品 防腐檢測儀器 理化系列產品 磁粉系列產品 滲透系列產品 超聲系列產品 射線系列產品 祥業管道爬行器 x射線探傷機

TIME1100超聲波探傷儀廠家

TIME1100超聲波探傷儀功能特點

§ 峰值記憶功能

§ 快速旋鈕調節、操作便捷

§ A、B型顯示方式

§ 缺陷當量計算

§ 具有回波包絡顯示功能

§ 具有防水功能

§ EL高亮圖形點陣顯示屏、無視角限制、不受溫度陽光影響

§ 多達10個獨立探傷通道

§ 能夠存儲500幅A掃描圖形

§ 具有獨立的雙閘門設置和報警功能

§ 鋰電池、無記憶性,連續工作時間可達8小時以上

§ 探頭角度和K值兩種輸入方式

§ 可以直接驅動U盤

§ 能夠跟PC機通訊,有功能強大的Windows數據處理軟件

§ 重復發射頻率可以達到1KHz

§ 超高的采樣頻率,射頻波形細節盡現

§ 具有波形凍結功能

TIME1100超聲波探傷儀技術參數

§ 探測范圍:2.5~ 5000mm

§ 材料聲速:1000~ 9999m/s

§ 工作頻率:0.2~15MHz(低頻0.2~1,中頻0.5~4,高頻2~15)

§ 增益調節:110dB(0.2、0.5、1、2、6、12步進)

§ 動態范圍:≥ 34dB

§ 垂直線性誤差:≤ 3%

§ 水平線性誤差:≤ 0.2%

§ 靈敏度余量:≥60dB(深200mmΦ2平底孔)

§ 數字抑制:(0 ~ 80)%,不影響線性與增益

§ 檢波方式:正半波,負半波,全波和射頻

§ 脈沖移位:—20μs~3400μs

§ 探頭延遲:0~99.99μs,分辨率0.0125μs

§ 掃描分辨率:0.1mm(2.5~ 99.99mm), 1mm(100~ 5000mm)

§ 外形尺寸:243×173×85mm

§ 重量:1.5Kg(含電池)

TIME1100超聲波探傷儀基本配置

§ TIME1100超聲波探傷儀主機

§ 直探頭2.5MHz20

§ 斜探頭5MHz8×9K2

§ 探頭連接電纜

§ 3A/9V電源適配器

§ 耦合劑

§ USB連接線

§ 鋰電池

TIME1100超聲波探傷儀可選附件

§ PC端通訊軟件

§ 串行通訊電纜(9針)

§ 超聲波探傷儀探頭

§ 超聲波探傷儀試塊

該公司產品分類: 超聲波探傷儀 測振儀 振動儀 粗糙度儀 紅外線測溫儀 便攜式硬度計 個人劑量儀 密度計 濕海綿針孔檢漏儀 觀片燈 埋地管道防腐層探測檢漏儀 電火花檢漏儀 渦流測厚儀 涂層測厚儀 超聲波測厚儀

LKCD-I、CEE-I、LKCD-III、LKCD-IV、LKCD-V廠家直銷四川成都重慶云南昆明貴州貴陽廣西南寧等西南地區磁粉探傷儀

 1.LKCD-I磁粉探傷儀

特點:LKCD-I磁粉探傷儀,采用多種磁化方式,高集成化電路使一臺設備兼?zhèn)湓瓗追N設備的全部功能。
技術指標:
電源電壓:交流220V
探頭工作電壓:交流36V
提升力:馬蹄(A型)探頭>=6kg 電磁軛(D型)探頭>=6kg 環型(O型)探頭1800TA
本機重量:5kg
外型尺寸:230*160*120mm
2.CEE-I磁粉探傷儀
特點:CEE-I型電磁軛傷儀是小型便攜式無損檢測專用儀器,具有交直流兩種輸出功能。采用可控硅組成無觸點的電子、電路、噪音小、壽命長、體積小、重量輕、提升力大等優點。
技術指標:
電源電壓:交流220V
輸出電壓:交流36V,直流8V
提升力:馬蹄(A型)探頭交流≥6kg 電磁軛(D型)探頭交流≥6kg 直流36kg 環型(O型)探頭交流1800TA主機重量:5.5kg
外型尺寸:230×110×165mm
3.LKCD-III磁粉探傷儀
LKCD-III多用磁粉探傷儀利用可控硅組成無觸點電子電路,操作方便、安全。在可選配A、D、E、O探頭的基礎上,又增加了旋轉磁場功能,可全方位地顯示工件的缺陷。對被探工件的裂紋顯示清晰、性能可靠。
電源電壓:交流220V
探頭工作電壓:交流36V
提升力:馬蹄(A型)探頭>=6kg 電磁軛(D型)探頭>=6kg 旋轉磁場(E型)探頭>=12kg  環型(O型)探頭1800TA
外型尺寸:230*160*120mm
儀器重量:5kg
4.LKCD-IV磁粉探傷儀
LKCD-IV磁粉多用探傷儀是具有旋轉、交流、直流三種磁化方式的磁粉探傷設備,儀器采用可控硅作無觸點開關,噪音小、壽命長、操作簡單、適應性強、工作穩定。它除具有便攜式機種的一切優點外,還具有移動機種的某此長處,擴展了用途簡化了操作。
電源電壓:交流220V
探頭工作電壓:交流36V 直流8V
提升力:馬蹄(A型)探頭>=6kg 電磁軛(D型)探頭>=6kg 直流36kg 旋轉磁場(E型)探頭>=12kg 環型(O型)探頭1800TA
外型尺寸:260*140*170mm
儀器重量:6.3kg
5.LKCD-V磁粉探傷儀
LKCD-V磁粉探傷儀具有旋轉、交流、直流三種磁化方式,儀器采用可控硅作無觸點開關,操作簡單,靈敏度高,為適應電網電壓液動,提高儀器的使用壽命,該儀器設有四個檔位,用以調節探頭工作電流在允許范圍內。
電源電壓:交流220V
探頭工作電壓:交流36V 直流8V
提升力:馬蹄(A型)探頭>=6kg 電磁軛(D型)探頭>=6kg 直流36kg  旋轉磁場(E型)探頭>=12kg環型(O型)探頭1800TA
外型尺寸:260*140*170mm

儀器重量:6.3kg 

MTC-A中科儀MTC-A鋼絲繩檢測儀 經濟實用型鋼絲繩探傷儀 超長保修作業

 產品介紹

———————————————————————————————————————————————————————————————————————————

中科儀MTC-A經濟實用型鋼絲繩探傷儀是我公司為用戶定制的一款經濟實惠實用型鋼絲繩探傷儀,配置上的精煉改造節約用戶的高成本,可對建筑電梯行業,起重機械行業,客運索道行業等的鋼絲繩進行檢測,滿足檢測單位需求。MTC-A是中科中儀應用虛擬儀器技術,以軟件取代傳統儀器,鋼絲繩的正常,磨損,斷絲,損傷狀態,由電腦直接顯示采樣處理,更直觀。對鋼絲繩進行全程掃描,結果準確無誤,重復性好。

中科儀MTC-A經濟實用型鋼絲繩探傷儀是我公司根據不同行業鋼絲繩報廢的國家標準規定,應用電磁原理,定性、定量、定位,在線無損檢測鋼絲繩的內外部斷絲、銹蝕、磨損、金屬截面積變化、松股、跳絲、變形、材質異常等缺陷

中科儀MTC-A經濟實用型鋼絲繩探傷儀根據國家計量法和安全生產法,生產的每臺儀器可由國家法定計量機構,按中國GB/T21837-2008國家標準、美國ASTM E1571行業標準和上海市Q/NYNAY01企業標準作為第三方進行檢驗,并出具檢測報告,獲得法定資質

 

產品圖片

———————————————————————————————————————————————————————————————————————————

鋼絲繩探傷儀

 

產品特點

———————————————————————————————————————————————————————————————————————————

轉換功能:原裝進口模塊,模數轉換、小波變換、噪聲剔除等功能更加強大。

信號傳輸:全數字傳輸,可配置無線遙測(周圍2000m)。

電腦平臺:軟件兼容Windows

軟件操作:電腦操作

分析處理方法:電腦軟件自動分析。

操作方式:電腦操作簡單人性化,更加實用

報險提示:在線檢測中當缺陷按設定超標時,立即實時聲光報險。

缺陷顯示:以波形遞進方式實時顯示鋼絲繩的正常,磨損,斷絲狀態。

檢測結果:可判定鋼絲繩內外斷絲數量;鋼絲繩磨損百分比;鋼絲繩損傷性質等缺陷。

檢測報告:不同行業標準的要求出具檢測報告。

報告生成:自動進入word文檔,進行打印。

傳感功能:導套浮動定心可變徑,聚磁環密集設置,磁敏元件陣列組合,一套傳感單元可覆蓋老產品多個探頭的信號采集和放大等功能

儀器標準:中國國家標準GB21837-2008《鐵磁性鋼絲繩電磁檢測方法》,美國標準ASTME1571《電磁方法檢測鐵磁性鋼絲繩標準條例》,上海市企業標準Q/NYAT01-97《MTC鋼絲繩安全檢測儀》,《煤礦安全規程》2005版,中華人民共和國煤炭行業標準MT/T970-2005《鋼絲繩(纜)在線無損定量檢測方法和判定規則》

 

技術參數

———————————————————————————————————————————————————————————————————————————

中科儀鋼絲繩直徑范圍:Φ1.5—300 mm(不同行業配置不同規格的傳感器)

鋼絲繩與傳感器相對速度:0.0—12.0 m/s(最佳:2.0 m/s)

鋼絲繩斷絲缺陷(LF)檢測:

定性:單處集中斷絲定性檢測準確率99.99%

定量:單處集中斷絲根數允許有一根或一當量根誤判

單處集中斷絲根數無誤差定量檢測100次以上準確率≥96%

金屬截面積定量變化率(LMA)檢測能力:檢測靈敏度重復性允許誤差±0.055%;檢測精度示值允許誤差±0.2%

位置(L)檢測能力:檢測長度示值百分比誤差±0.3%

電   源:電池供電5V

環境溫度:-20℃~+50℃

壓力條件:86-206Kpa

相對濕度:20-98%

 

符合標準

———————————————————————————————————————————————————————————————————————————

中國國家標準GB21837-2008《鐵磁性鋼絲繩電磁檢測方法》,美國標準ASTME1571《電磁方法檢測鐵磁性鋼絲繩標準條例》,上海市企業標準Q/NYAT01-97《MTC鋼絲繩安全檢測儀》,《煤礦安全規程》2005版,中華人民共和國煤炭行業標準MT/T970-2005《鋼絲繩(纜)在線無損定量檢測方法和判定規則》

 

產品配置

———————————————————————————————————————————————————————————————————————————

 

序號

名稱

數量

備注

標

準

1

聚磁環傳感器(可定做)

1

進口原裝電子及磁敏元件

2

編碼器

1

進口原裝編碼器

3

在線報險模塊

1

 

4

信號傳輸電纜

1

 

5

信號線

1

 

6

采樣處理軟件

1

 

7

品牌筆記電腦

1

配置含電腦包及鼠標

8

導牽引安全索

1

保證在線檢測安全

9

便攜式儀器箱

1

 
 

隨機手冊資料以及合格證

1

 

MTC-A鋼絲繩探傷儀三年保修,終身維護,歡迎您的咨詢

該公司產品分類: 進口設備 水深儀 多功能型粗糙度儀 經濟型粗糙儀 粗糙度儀 測厚儀儀器配件 涂層測厚儀 超聲波測厚儀 測厚儀儀器 硬度計配件 臺式硬度計 超聲波硬度計 便攜式硬度計 硬度計儀器 探傷儀配件類 磁粉探傷儀 鋼軌探傷儀 超聲波探傷儀 鋼絲繩探傷儀 探傷儀

TUD201超聲波探傷儀

TUD201超聲波探傷儀TUD201特征

  ·具有存儲功能,可以存儲100A掃圖形及參數和100組共10000個厚度值;  ·具有雙閘門設置和報警功能。能夠在屏幕上任意設置閘門的位置和寬度,有進波、 失波和自動三種報警方式;  ·可以在單探頭和雙探頭兩種探傷工作方式之間任意切換;  ·探頭阻尼通過菜單選擇在50、150、400之間切換;  ·可以利用標準試塊手動或自動生成DAC曲線;  ·具有線性抑制功能,屏高的080%,步距:1%;  ·具有波形和探傷參數的凍結和解凍功能;  ·具有系統參數的加鎖/解鎖功能;  ·具有存儲圖形的回放功能,將已存儲的A掃圖形從存儲區取出并顯示在屏幕上;  ·具有刪除功能,將指定的內容(以存儲組號表示)從存儲區刪除;  ·具有打印功能,通過串行打印機打印厚度報告與波幅曲線;  ·可以進行屏幕硬拷貝,將當前屏幕上的圖形和菜單拷貝并打;  ·具有雙向RS232串口,即可將數據文件傳輸至PC機,也可用PC機下載數據至探傷設置參數,進行數據處理、保存、生成探傷報告等;  ·聲程測量;  ·顯示方式:EL高亮度圖形點陣顯示。

TUD201超聲波探傷儀TUD201應用

可以用于實驗室,也可以用于工程現場。廣泛應用在鍋爐、壓力容器、航天、航空、電力、石油、化工、海洋石油、管道、軍工、船舶制造、汽車、機械制造、冶金、金屬加工業、鋼結構、鐵路交通、核能電力、高校等行業。

 

TUD201超聲波探傷儀TUD201技術參數

技術指標  ·測量范圍(mm): 2.59999(鋼縱波)  ·工作頻率(MHz) 0.210(低頻0.21,中頻0.64,高頻110三檔可選)  ·增益調節:   110dB (0.20.5、1、26、12步距調節,0.0時鎖定)  ·垂直線性誤差: ≤3%  ·動態范圍:   ≥32dB  ·水平線性誤差: ≤0.2%  ·波形顯示:   正半波、負半波、全波和射頻  ·探傷靈敏度余量: > 50dB(2.5P20/200Ф2)  ·脈沖移位:    20+3400 us  ·探頭延時:    0us99.99us,分辨率0.01  ·掃描分辨率:   0.1mm (5100mm);1mm (1001000mm) ;            10mm (1000 9999mm)  ·聲速:      1000 m/s9999m/s  ·外形尺寸(mm):  230×184×53  ·重量 (含電池):  1.4 Kg

 

標準配置  1.主機1  2.鋰電池1  3. 3A/9V電源適配器1  4.電源電纜1  5.LEMO探頭連電纜2  6.直探頭1  7.斜探頭1選配件  1.行式熱敏打印機(TPUP-NH)  2.串行通訊電纜  3.PC通訊軟件

型號:MUT650C庫號:M392084超聲波探傷儀 型號:MUT650C庫號:M392084

超聲波探傷儀 型號:MUT650C
庫號:M392084   
       midwest- MUT650C是一款便攜式、全數字式超聲波探傷儀,能夠快速便捷、無損傷、精確地進行工件內部多種缺陷(裂紋、夾雜、氣孔等)的檢測、定位、評估和診斷。既可以用于實驗室,也可以用于工程現場。本儀器能夠廣泛地應用在制造業、鋼鐵冶金業、金屬加工業、化工業等需要缺陷檢測和質量控制的領域,也廣泛應用于航空航天、鐵路交通、鍋爐壓力容器等領域的在役安全檢查與壽命評估。本儀器采用國際的集成電路技術和新型顯示屏,其各項性能指標均達到或超過國際水平。儀器采用人工智能技術,功能強勁,使用方便。·功能特點本儀器專為嚴苛的現場環境而設計,堅固耐用,獨有的密封設計使它能夠抵御從海洋到沙漠各種惡劣環境中的潮濕、風沙、灰塵、油污及其他污染。獨特防潑濺設計,防水防油,可在雨天工作。獨特的360˚可旋轉支架使用方便。缺陷回波參數(距離、水平、垂直、波幅、dB當量值、平底孔當量值)實時顯示,探傷信息一目了然,并可自動完成缺陷定量的平底孔轉換。方波脈沖、發射電壓、濾波頻帶、探頭阻尼可調,適用于各種工件的探傷。全中文顯示,主從式菜單,并設計有快捷按鍵和數碼飛梭旋輪,操作便捷,技術領先。采用TFT全數字真彩色液晶顯示器,屏幕亮度清晰,可根據環境選擇背景色、波形顏色和菜單項顏色,液晶亮度可自由設定,以便可以適應不同操作環境。高性能安保電池模塊便于拆裝,大容量高性能鋰離子電池模塊使儀器連續工作時間延長到八小時以上;儀器輕小便攜,單手即可以把持,經久耐用,引導行業潮流。·主要技術參數 檢 測 范 圍: (0~9999)mm工 作 頻 率: (0.2~20)MHz聲 速 范 圍: (1000~15000)m/s動 態 范 圍: ≥36dB垂直線性誤差: ≤2.5%水平線性誤差: ≤0.1%分 辨 力: >40dB(5P14)靈 敏 度余量: >65dB(深200mmФ2平底孔)數 字 抑 制: (0~80)%,不影響線性與增益電噪聲 電 平: ≤8%探 頭 類 型: 直探頭、斜探頭、雙晶探頭、穿透探頭閘 門: 進波門、失波門;單閘門讀數、雙閘門讀數;峰值觸發、邊沿觸發報 警: 蜂鳴報警,LED燈報警電 源: 直流(DC)9V;鋰電池,可連續工作8小時以上外 型 尺 寸: 280mm×220mm×70mm環 境 溫 度: (-10~50)℃相 對 濕 度: (20~95)%RH注:以上指標是在探頭頻率為2.5MHz、檢波方式為全波的情況下所測得。檢測范圍零界面入射~9999mm(鋼中、縱波),可連續調節發射脈沖脈沖幅度:200V、300V、400V、500V、600V分級選擇,適用探頭范圍廣脈沖寬度:在(0.1~0.5)µs范圍內連續調節,以匹配不同頻率的探頭探頭阻尼:68Ω、100Ω、150Ω、500Ω可選,滿足靈敏度及分辨率的不同工作要求工作方式:直探頭、斜探頭、雙晶探頭、穿透探傷放大接收硬件實時采樣:高分辨率10位AD轉換器,采樣速度320MHz,波形高度保真檢波方式:正半波、負半波、全波、射頻檢波濾波頻帶:根據探頭頻率全自動匹配,無需手動設置。閘門讀數:單閘門和雙閘門讀數方式可選擇;觸發方式可選擇峰值觸發或邊沿觸發。 增益:總增益量110dB,設0dB、0.1dB、2dB、6dB步進值,獨特的全自動增益調節及掃查增益功能,使探傷既快捷又。閘門報警閘門起始、閘門寬度、閘門高度任意可調;B閘門可選擇設置進波報警或失波報警;閘門內蜂鳴聲和LED燈(吵噪環境中LED燈報警非常)報警及關閉。數據存儲100組探傷參數通道,可預先調校好各類探頭和儀器的組合參數并存入探傷參數通道,以方便隨時調用;可自由設置各行業探傷標準;可存儲1000幅探傷回波信號及參數,實現存儲、讀出及通過USB接口傳輸。探傷功能探傷標準:內置各行業常用探傷標準,直接調用,方便、快捷焊縫圖示:可設置焊縫形態參數,探傷中直觀顯示焊縫圖和缺陷在焊縫中的位置自動校準:探頭零點和探頭角度(K值)自動校準功能;聲速自動測量功能波峰記憶:實時檢索缺陷波,記錄缺陷最大值Φ值計算:直探頭鍛件探傷找準缺陷波后自動計算、顯示缺陷當量尺寸缺陷定位:實時顯示缺陷水平、深度(垂直)、聲程位置缺陷定量:缺陷當量dB值實時顯示缺陷定性:通過回波包絡波形,方便人工經驗判斷曲面修正:用于曲面工件探傷,可實時顯示缺陷周向位置(可選功能)DAC/AVG:曲線自動生成,取樣點不受限制,并可進行補償與修正。曲線隨增益自動浮動、隨聲程自動擴展、隨延時自動移動。能顯示任意孔徑的AVG曲線AWS D1.1: 美國焊接學會標準,為各類AWS焊縫檢測應用提供一個動態反射體“缺 陷定級”。可避免手工計算,提高檢測效率(可選功能)裂紋測高:利用端點衍射波自動測量、計算裂紋高度(可選功能)門內展寬:放大回波細節,便于回波分析連續記錄:實時記錄波形,存儲、回放波形凍結:凍結屏幕上顯示的波形,便于缺陷分析回波編碼:以不同顏色顯示1~6次回波顯示區,便于判斷缺陷位置B型掃描:實時掃查、橫截面顯示,可顯示工件缺陷形狀,使探測結果更直觀。實時時鐘實時探傷日期、時間的跟蹤記錄,并記錄存儲。通訊接口USB2.0高速通訊傳輸接口電池模塊高容量鋰電池模塊,在線充電,方便探傷人員使用。服務本公司所有產品兩年內全免費維修,終身保修,易損易耗件價格合理!
該公司產品分類: 分析儀

最新產品

熱門儀器: 液相色譜儀 氣相色譜儀 原子熒光光譜儀 可見分光光度計 液質聯用儀 壓力試驗機 酸度計(PH計) 離心機 高速離心機 冷凍離心機 生物顯微鏡 金相顯微鏡 標準物質 生物試劑